Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 5 Anleitungen, die diese beinhalten.
Schritt 2 übersetzen
Schritt 2
-
For the following steps, use a Phillips #1 screwdriver.
-
Remove the twelve 6-mm screws that border the bottom of the laptop.
-
Remove the 6-mm screw located in the lower middle of the device.
-
Remove the three 3-mm screws located in the battery bay.
-
Remove the one 4-mm screw located near the RAM.
Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.