Zum Hauptinhalt wechseln

Sony WH-1000XM4 Akku tauschen

Englisch
Deutsch
Schritt 5
Sony WH-1000XM4 Battery Replacement, Disconnect the battery: Schritt 0, Bild 1 von 2 Sony WH-1000XM4 Battery Replacement, Disconnect the battery: Schritt 0, Bild 2 von 2
Disconnect the battery
  • Warning: Over time, this connector can become brittle. Go slowly, and try to hold the off-white connector to the board as you work. Don't use excessive force, or you risk pulling the connector off of the board and breaking the fragile solder joints.

  • Use a pair of tweezers to grip the edges of the battery connector, and pull up to disconnect it from the main board. If necessary, lever the connector out, or "walk" the tweezer arms side-to-side to release the connector from its socket.

  • Always pull cables by their connectors and not the wires themselves.

Warnung: Im Laufe der Zeit kann dieser Stecker brüchig werden. Arbeite langsam und versuche den nicht weißen Teil gegen die Platine zu halten. Wende nicht zu viel Kraft auf, du riskierst sonst, dass der Anschluss aus der Platine bricht.

Greife mit einer Pinzette den Akkustecker und ziehe ihn nach oben aus der Buchse heraus, um ihn vom Mainboard zu trennen. Wenn nötig, musst du hebeln oder mit der Pinzette abwechselnd auf beiden Seiten ziehen, so dass er allmählich herauskommt.

Ziehe immer am Stecker, nicht an den Kabeln selbst!

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.