iPad mini 5 Wi-Fi スクリーンの交換

Englisch

Japanisch

Grundständige Anleitungen

Bevor diese Anleitung als vollständig übersetzt gilt, müssen alle grundständigen Anleitungen übersetzt werden.

ひび割れたスクリーン表面にテープを貼る方法

iPad mini 4 開口方法

スクリーンの取り外し

iPad mini 5 Wi-Fi ホームボタンアセンブリの交換

iPad mini 5 Wi-Fi 磁気センサーの交換

Informationen zur Anleitung

= Fertig = Unvollständig

Welches Teil ersetzt du?

Titel

Einleitung

Follow this guide to replace the screen on an iPad mini 5 Wi-Fi. You may need to do this if the screen is cracked or has stopped working.

This guide also shows how to transfer the original home button and magnetic sensor to the replacement part.

'''Note that only the iPad’s original home button assembly will be capable of Touch ID functionality.''' If you would like to maintain Touch ID functionality, you’ll need to transfer your original home button assembly to the new screen.

'''Some replacement screens don't come with a magnetic sensor installed.''' Without a magnetic sensor, the iPad won’t be able to sleep and wake when using a Smart Cover. It may also cause the power button to not be able to sleep and wake the iPad. AssistiveTouch may also lose its sleep and wake functionality. Without a magnetic sensor, holding down the power button to prompt the power off slider will still wake the screen. The home button will also still wake the screen.

'''Transferring the magnetic sensor requires advanced soldering skills.''' The magnetic sensor cable is soldered to the screen. Make sure to follow '''[[Topic:Soldering#Section_Safety_Procedures|soldering safety procedures|new_window=true]]''' such as wearing eye protection, working in a well-ventilated area, and washing your hands with soap and water after soldering.

'''For your safety, discharge the battery below 25% before disassembling your device.''' This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair. If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].

Some photos in this guide are from a different model and may contain slight visual discrepancies, but they won't affect the guide procedure.

Abschluss

Welches Teil ersetzt du?

Titel

Einleitung

Abschluss

Anleitungsschritte

1. Schritt — スクリーンだけが残ります

ホームボタンとマグネット式センサを取り外した後に、スクリーンだけが残ります。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.