微软 Surface Pro 6 散热槽更换

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 9 Anleitungen, die diese beinhalten.

Englisch

Chinesisch

Schritt 1 übersetzen

Schritt 1

Remove the heat sink shield

Insert one point of a pair of pointed tweezers into a gap in the corner of the EMI shield covering the heat sink.
Use the tweezers to pry the EMI shield away from the motherboard as much as you can without bending it. Do not remove it yet.
Try not to deform the shield too much—you will need to reinstall it during reassembly.
Take care not to puncture the battery with the tweezers while working on this shield.

移除散热槽屏蔽盖

将一对尖头镊子的一个尖头插入覆盖散热槽的 EMI 屏蔽角的缝隙中。
使用镊子尽可能多地将 EMI 屏蔽从主板上撬开，而不要弯曲它。暂时不要移除它。
尽量不要使屏蔽盖变形太多——你需要在重新组装时重新安装它。
在此屏蔽盖上工作时，请注意不要用镊子刺穿电池。

	[title] Remove the heat sink shield
-	[* black] Insert one point of a pair of pointed tweezers into a gap in the corner of the EMI shield covering the heat sink.
+	[* black] Insert one point of a pair of [product\|IF145-020-2\|pointed tweezers] into a gap in the corner of the EMI shield covering the heat sink.
	[* black] Use the tweezers to pry the EMI shield away from the motherboard as much as you can without bending it. Do not remove it yet.
	[* icon_caution] Try not to deform the shield too much—you will need to reinstall it during reassembly.
	[* icon_caution] Take care not to puncture the battery with the tweezers while working on this shield.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.