Repariere deine Sachen Community Store

Sostituzione gruppo scheda madre Microsoft Surface Pro 6

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 2 Anleitungen, die diese beinhalten.

Zurück zur Anleitung
Englisch
Italienisch
Schritt 6
Microsoft Surface Pro 6 Motherboard Assembly Replacement, Remove the camera connector shield: Schritt 0, Bild 1 von 3 Microsoft Surface Pro 6 Motherboard Assembly Replacement, Remove the camera connector shield: Schritt 0, Bild 2 von 3 Microsoft Surface Pro 6 Motherboard Assembly Replacement, Remove the camera connector shield: Schritt 0, Bild 3 von 3
Remove the camera connector shield

  • Insert one point of a pair of pointed tweezers into a gap in the corner of the EMI shield covering the camera connectors.

  • Use the tweezers to pry the EMI shield away from the motherboard as much as you can without bending it.

  • Repeat this procedure at different points around the shield until it is free. Remove the shield.

  • Try not to deform the shield too much—you will need to reinstall it during reassembly.

Rimuovi la protezione del connettore della fotocamera

Inserisci una punta di un paio di pinzette in una fessura nell'angolo della schermatura EMI che copre i connettori della fotocamera.

Usa le pinzette per sollevare la schermatura EMI dalla scheda madre il più possibile senza piegarla.

Ripeti questa procedura in diversi punti intorno alla schermatura finché non si libera. Rimuovi la schermatura.

Cerca di non deformare troppo la schermatura: dovrai reinstallarla durante il rimontaggio.

[title] Remove the camera connector shield
-[* black] Insert one point of a pair of pointed tweezers into a gap in the corner of the EMI shield covering the camera connectors.
+[* black] Insert one point of a pair of [product|IF145-020-2|pointed tweezers] into a gap in the corner of the EMI shield covering the camera connectors.
[* black] Use the tweezers to pry the EMI shield away from the motherboard as much as you can without bending it.
[* black] Repeat this procedure at different points around the shield until it is free. Remove the shield.
[* icon_caution] Try not to deform the shield too much—you will need to reinstall it during reassembly.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.