Repariere deine Sachen Community Store

微软 Surface Pro 6 主板组件更换

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 2 Anleitungen, die diese beinhalten.

Zurück zur Anleitung
Englisch
Chinesisch
Schritt 16
Microsoft Surface Pro 6 Motherboard Assembly Replacement, Remove the two large EMI shields: Schritt 0, Bild 1 von 3 Microsoft Surface Pro 6 Motherboard Assembly Replacement, Remove the two large EMI shields: Schritt 0, Bild 2 von 3 Microsoft Surface Pro 6 Motherboard Assembly Replacement, Remove the two large EMI shields: Schritt 0, Bild 3 von 3
Remove the two large EMI shields

  • Insert one point of a pair of pointed tweezers into a gap in the corner of the left-most of the remaining large EMI shields.

  • Use the tweezers to pry the EMI shield away from the motherboard as much as you can without bending it.

  • Repeat this procedure at different points around the shield until it is free. Remove the shield.

  • Try not to deform the shield too much—you will need to reinstall it during reassembly.

  • Take care not to puncture the battery with the tweezers while working on this shield.

移除两个大的 EMI 屏蔽罩

将一对尖头镊子的一个尖头插入剩余大 EMI 屏蔽罩最左侧角落的缝隙中。

使用镊子尽可能多地将 EMI 屏蔽从主板上撬开，而不要弯曲它。

在防护罩周围的不同点重复此过程，直到它松开为止。取下防护罩。

尽量不要使护罩变形太多——您需要在重新组装时重新安装它。

在此防护罩上工作时，请注意不要用镊子刺穿电池。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.