Repariere deine Sachen Community Store

Mackie CR3 CR4 L/R Luidsprekerkeuze bypass

Zurück zur Anleitung
Englisch
Niederländisch
Nächster Schritt

Schritt 1 übersetzen

Schritt 1
Mackie CR3 CR4 L/R Speaker Selector Bypass: Schritt 0, Bild 1 von 1

  • Turn off your powered speaker, unplug it, and remove the 10 short Phillips head screws on the back that line the perimeter.

  • Once removed, give it a little wiggle, and you can pull out the electronics from the casing pretty easily. A little care is required, as there is cabling connecting it to the speaker front, but there is enough slack that you don't need to worry about disconnecting for this fix.

Schakel uw actieve luidspreker uit, haal de stekker uit het stopcontact en verwijder de 8 korte kruiskopschroeven aan de achterkant.

Eenmaal verwijderd, kunt u de elektronica vrij eenvoudig uit de behuizing nemen. Een beetje zorg is vereist, aangezien er kabels zijn die naar het luidsprekerfront gaan, maar er is genoeg speling zodat u zich geen zorgen hoeft te maken.

-[* black] Turn off your powered speaker, Unplug it, and remove the 8 short Phillips head screws on the back.
-[* black] Once removed, you can pull out the electronics from the casing pretty easily. A little care is required, as there is cabling connecting it to the speaker front, but there is enough slack that you don't need to worry about disconnecting for this fix.
+[* black] Turn off your powered speaker, unplug it, and remove the 10 short Phillips head screws on the back that line the perimeter.
+[* black] Once removed, give it a little wiggle, and you can pull out the electronics from the casing pretty easily. A little care is required, as there is cabling connecting it to the speaker front, but there is enough slack that you don't need to worry about disconnecting for this fix.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.