Zum Hauptinhalt wechseln

Samsung Galaxy S21 Ultra スクリーンとバッテリーアセンブリの交換

Englisch
Japanisch

Informationen zur Anleitung

= Fertig = Unvollständig
    Follow this guide to replace the screen and battery assembly on your Samsung Galaxy S21 Ultra with a genuine Samsung part.
    ***This guide is written for the genuine Samsung screen and battery assembly.*** The assembly consists of the screen, battery, and frame together in one part. Be sure you have the right part before you begin the repair.

    Before you begin, refer to the ++[document|28390|Samsung Self-Repair document]++ for safety information.
    If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]]. Before disassembling your device, ***completely*** ***discharge the battery***. This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair.
    Note: Retaining water resistance after the repair will depend on how well you reapply the adhesive, but your device will lose its IP (Ingress Protection) rating.
      ***To reassemble your device, follow the instructions in reverse order*** and perform the opposite actions, e.g., "reattach" instead of "removing." Skip steps that use heating and prying, and pay close attention to the 📌 bullets as you work through the steps.
      After you've completed the repair, download the Samsung Members App from the Galaxy Store or the Play Store, and ++[document|28390|follow the Samsung Self-Repair document]++ (beginning page 10) to make sure your device is fully functional.
      Download the [link|https://s3.amazonaws.com/ifixit-assets/static/standalone/samsung/SRA.U.1.0.4.apk|Self Repair Assistant] on your device and ++[document|28390|follow the Samsung Self-Repair document]++ (beginning page 11) to perform a battery cycle reset.
      ***To reassemble your device, follow these instructions in reverse order.***
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/Samsung%20Galaxy%20S21%20Ultra|Answers community] for help.

      Anleitungsschritte

      1. Schritt — 左側5Gミリ波アンテナを外す

      左側5Gミリ波アンテナのプレスコネクタの接続を上向きに持ち上げて、接続を外します。

      2. Schritt — 右側5Gミリ波アンテナを外す

      スパッジャーを使って、5Gミリ波アンテナのプレスコネクタの接続を上向きにこじ開けて外します。

      3. Schritt — 5Gミリ波んアンテナのネジを外す

      プラスドライバーを使って、5Gミリ波アンテナを固定している、長さ3.4mmネジを4本外します。

      4. Schritt — 右側5Gミリ波アンテナを外す

      スパッジャーの先端を使って、右側5Gミリ波アンテナブラケットの下側のネジタブをこじ開けます。

      5. Schritt — 左側5Gミリ波アンテナを外す

      スパッジャーの先端を使って、左側5Gミリ波アンテナのブラケットの下側にあるネジタブをこじ開けます。

      6. Schritt — イヤピースとレーザーAGモジュールアセンブリのネジを外す

      プラスドライバーを使って、イヤピーススピーカーとレーザーAFモジュールアセンブリを固定している、長さ3.9mmネジを4本外します。

      7. Schritt — レーザーAFモジュールを外す

      スパッジャーを使って、レーザーAFモジュールとイヤースピーカーのフレックスケーブルのコネクタをソケットからまっすぐ上にこじ開けて外してください。

      8. Schritt — イヤピーススピーカーとレーザーAFモジュールアセンブリを外す

      イヤピーススピーカーの右下コーナーとレーザーAFモジュールアセンブリを先端が鋭利でないピンセットで摘みます。

      9. Schritt — ディスプレイ内蔵指紋/アンテナフレックスケーブルを外す

      ディスプレイ内の指紋認証ケーブルとアンテナフレックスケーブルは、スパッジャーでコネクタをソケットからまっすぐ上にこじ開け、取り外します。

      10. Schritt — フロントカメラを外す

      フロントカメラケーブルのコネクタをスパッジャーでまっすぐ上向きにこじ開けて、ソケットから接続を外します。

      11. Schritt — 電源ボタンを外す

      スパッジャーを使って、電源ボタンのフレックスケーブルをソケットからまっすぐ上向きにこじ開けて、接続を外します。

      12. Schritt — ディスプレイケーブルを外す

      スパッジャーを使って、ディスプレイケーブルのプレスコネクタの接続をこじ開けて外します。

      13. Schritt — ディスプレイケーブルを動かす

      ピンセットもしくは指で、ディスプレイケーブルをデバイスから折り曲げて下に動かします。

      14. Schritt — カメラモジュールのネジを外す

      プラスドライバーを使って、カメラモジュールを固定している、長さ3.9mmネジを外します。

      15. Schritt — マザーボードをこじ開ける

      スパッジャーを振動モーターの隣とマザーボードの上部端の下に差し込みます。

      16. Schritt — マザーボードを外す

      慎重にマザーボードを取り出します。

      17. Schritt — フロントカメラを温める

      温めたiOpenerをフロントカメラに90秒間当てます。

      18. Schritt — フロントカメラを外す

      フレームとフロントカメラの間の隙間に、スパッジャーを差し込みます。

      19. Schritt — スクリーンとバッテリーアセンブリが残る

      これでスクリーンとバッテリーアセンブリが残ります。

      20. Schritt — フロントカメラアセンブリのインストラクション

      フロントカメラを再インストールする際に次のインストラクションに従ってください。

      Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.