Zum Hauptinhalt wechseln

iPad Pro 11インチ 第2世代 リアカメラの交換

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 2 Anleitungen, die diese beinhalten.

Englisch
Japanisch

Schritt 1 übersetzen

Schritt 1
iPad Pro 11" 2nd Gen Rear Camera Replacement, Unfasten the rear camera shield: Schritt 0, Bild 1 von 2 iPad Pro 11" 2nd Gen Rear Camera Replacement, Unfasten the rear camera shield: Schritt 0, Bild 2 von 2
Unfasten the rear camera shield
  • Some of these screws are the same length but have different thread sizes. Don't mix up the screws or you'll damage the threads in the frame.

  • Use a Phillips screwdriver to remove the five screws securing the camera bracket to the frame:

  • One 1.3 mm screw

  • One 2.8 mm screw

  • One 1.3 mm screw

  • One 1.8 mm screw

  • One 1.8 mm screw

これらのネジの中には、長さは同じでもネジのサイズが異なるものがあります。ネジを間違えると、フレームのネジ山を傷めることになるので注意してください。

プラスドライバーを使って、フレームにカメラブラケットを固定している5本のネジを外します。

1.3 mmネジ−1本

2.8 mmネジー1本

1.3 mmネジー1本

1.8 mmネジー1本

1.8 mmネジー1本

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.