Zum Hauptinhalt wechseln

Procedura di apertura iPad Pro 12.9" 5° Gen

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 6 Anleitungen, die diese beinhalten.

Englisch
Italienisch
Schritt 5
iPad Pro 12.9" 5th Gen Opening Procedure, Insert an opening pick: Schritt 0, Bild 1 von 3 iPad Pro 12.9" 5th Gen Opening Procedure, Insert an opening pick: Schritt 0, Bild 2 von 3 iPad Pro 12.9" 5th Gen Opening Procedure, Insert an opening pick: Schritt 0, Bild 3 von 3
Insert an opening pick
  • If your screen is badly cracked, covering it with a layer of clear packing tape may allow the suction cup to adhere. Alternatively, very strong tape may be used instead of the suction cup. If all else fails, you can superglue the suction cup to the broken display.

  • Apply a suction handle to the screen as close to the center of the right edge as possible.

  • Pull up on the suction handle with a strong, steady force to create a small gap between the frame and screen.

  • The large screen is very fragile. Only create a gap big enough to insert an opening pick.

  • If you're having trouble making a gap, reapply a heated iOpener to the right edge for two minutes.

  • Insert an opening pick into the gap.

  • Don't insert the pick more than 5 mm to avoid damaging the screen.

Se il tuo schermo è molto crepato, coprirlo con uno strato di nastro adesivo trasparente da pacchi potrebbe aiutare la ventosa a fare presa. In alternativa, puoi usare del nastro adesivo molto resistente al posto della ventosa. Se niente funziona, puoi incollare la ventosa allo schermo rotto con della supercolla.

Applica una ventosa con manico allo schermo, il più vicino possibile al bordo destro.

Tira il manico della ventosa con forza costante per creare una piccola fessura tra telaio e schermo.

Lo schermo grande è molto fragile. Crea solo un'apertura abbastanza grande per inserire un plettro di apertura.

Se stai avendo problemi a creare una fessura, appoggia di nuovo un iOpener scaldato sul bordo destro per due minuti.

Inserisci un plettro di apertura nella fessura.

Non inserire il plettro più di 5 mm per evitare di danneggiare lo schermo.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.