ZTE Axon 7 Screen Replacement

Englisch

Deutsch

Schritt 7 übersetzen

Schritt 7

Place the tip of your opening tool or spudger under the edge of the two press connectors on the left side of the motherboard.
Pry the connector straight up from its socket to disconnect from the motherboard.
Be very careful to pry only under the edge of the connector, and not under the socket itself. If you pry under the socket, you will separate it from the circuit board, which requires specialized microsoldering skills and equipment to repair.
To reconnect, align the connector carefully over its socket and press down with your fingertip—first at one side, then the other—until it clicks into place.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.