Zum Hauptinhalt wechseln

三角撬片深度标记

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 313 Anleitungen, die diese beinhalten.

Englisch
Chinesisch

Schritt 1 übersetzen

Schritt 1
Mark your Opening Picks at 3 mm, Mark your opening picks: Schritt 0, Bild 1 von 3 Mark your Opening Picks at 3 mm, Mark your opening picks: Schritt 0, Bild 2 von 3 Mark your Opening Picks at 3 mm, Mark your opening picks: Schritt 0, Bild 3 von 3
Mark your opening picks
  • If inserted too far, an opening pick can damage your device. Follow this step to mark your pick and prevent damage.

  • Measure 3 mm from the tip and mark the opening pick with a permanent marker.

  • You can also mark the other corners of the pick with different measurements.

  • Alternatively, tape a coin to a pick 3 mm from the tip.

如果插入太深,三角撬片可能会损坏你的设备。 按照此步骤标记撬片并防止损坏。

从尖端测量 3 毫米,并用永久性记号笔标记三角撬片。

你还可以用不同的尺寸标记三撬片的其他角。

或者,将 将一枚硬币 粘在距撬片尖端 3 毫米处。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.