Zum Hauptinhalt wechseln

iMac Intel 27" EMC 2309 und 2374 Glasscheibe austauschen

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 47 Anleitungen, die diese beinhalten.

Englisch
Deutsch

Schritt 2 übersetzen

Schritt 2
iMac Intel 27" EMC 2309 and 2374 Glass Panel Replacement: Schritt 0, Bild 1 von 3 iMac Intel 27" EMC 2309 and 2374 Glass Panel Replacement: Schritt 0, Bild 2 von 3 iMac Intel 27" EMC 2309 and 2374 Glass Panel Replacement: Schritt 0, Bild 3 von 3
  • Gently lift the glass panel perpendicular to the face of the LCD, enough to clear the steel mounting pins attached along the underside of the top edge of the glass panel.

  • Pull the glass panel away from the lower edge of the iMac and carefully set it aside.

  • Don't use the suction cups to carry the glass panel—if either one loses its grip, the panel could fall and break.

  • After setting the glass panel down safely, be sure to release the suction cups, as the suction force over time can crack the glass.

  • During reinstallation, be sure to meticulously clean the inside of the glass panel and the face of the LCD as any dust or fingerprints trapped inside will be annoyingly visible when the machine is turned on.

Hebe die Glasscheibe rechtwinklig so weit vom Display weg, dass sich die metallenen Befestigungsstifte an der Unterseite der Oberkante lösen.

Ziehe die Glasscheibe weg von der unteren Kante des iMac und lege sie vorsichtig beiseite.

Trage die Glasscheibe nicht nur an den Saughebern, da sie dir sonst runterfällt, wenn ein Saugheber sich löst.

Löse die Saugheber, nachdem du die Glasscheibe sicher abgelegt hast, da der Unterdruck auf Dauer das Glas beschädigen kann.

Denk dran, den Bildschirm und die Innenseite der Glasscheibe vor dem Wiederzusammenbau sorgfältig zu putzen, da eingeschlossener Staub oder Fingerabdrücke deutlich sichtbar sind, sobald du das Display einschaltest.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.