Zum Hauptinhalt wechseln

Back Cover Removal

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 19 Anleitungen, die diese beinhalten.

Englisch
Chinesisch

Schritt 1 übersetzen

Schritt 1
Back Cover Removal, Unfasten the back cover: Schritt 0, Bild 1 von 2 Back Cover Removal, Unfasten the back cover: Schritt 0, Bild 2 von 2
Unfasten the back cover
  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from.

  • Use a Phillips #0 screwdriver to remove the five 17.2 mm‑long screws securing the top edge and bottom corners of the back cover.

  • Use a Phillips #0 screwdriver to fully loosen the remaining captive screw at the center of the bottom edge. This should create a small gap between the back cover and chassis.

  • Don't try to remove this screw.

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Hier Übersetzung einfügen

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.