Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 4 Anleitungen, die diese beinhalten.
Schritt 4 übersetzen
-
Insert the flat end of a spudger between the bottom left edge of the thumbstick assembly and the chassis.
-
Pry up the thumbstick assembly and remove it, making sure to thread the thumbstick ring cable through its cutout.
-
Orient the board over your device thumbstick side down.
-
Thread the thumbstick ring cable through its cutout on the board.
-
Lift the left edge of your device and push the thumbstick assembly firmly into place so the small circular cutouts on the left edge go over their alignment posts. The board should stay firmly in place.
Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.