How to Apply Liquid Metal in a PlayStation 5

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 2 Anleitungen, die diese beinhalten.

Zurück zur Anleitung

Englisch

Japanisch

Vorheriger Schritt Nächster Schritt

Schritt 2 übersetzen

Schritt 2

How to Apply Liquid Metal in a PlayStation 5, Remove the old liquid metal from the APU: Schritt 0, Bild 1 von 2

How to Apply Liquid Metal in a PlayStation 5, Remove the old liquid metal from the APU: Schritt 0, Bild 2 von 2

Remove the old liquid metal from the APU

Don't remove the foam barrier that surrounds the APU.
Just as you did for the heatsink, clean and remove all of the old liquid metal and its residue from the APU.
Don't let any of the liquid metal drip onto the board. Liquid metal is conductive and could cause a short. The foam barrier keeps the liquid metal from leaking out.
This is a good point to replace any thermal pads on the bottom of the main board, if necessary. The pads might be stuck to both the bottom shield plate and the main board.
Make sure your replacement pads are the same thickness as the originals, or the foam around the APU may not seal properly.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.