Repariere deine Sachen Community Store

Sostituzione copertura posteriore Xbox Series X

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 24 Anleitungen, die diese beinhalten.

Zurück zur Anleitung
Englisch
Italienisch
Schritt 5
Xbox Series X (Digital Edition) Back Panel Replacement, Remove the back panel screws: Schritt 0, Bild 1 von 2 Xbox Series X (Digital Edition) Back Panel Replacement, Remove the back panel screws: Schritt 0, Bild 2 von 2
Remove the back panel screws

  • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your console.

  • Use a T8 Torx driver to remove the two 7.4 mm‑long screws securing the back panel.

Rimuovi le viti della copertura posteriore

Usa un cacciavite Torx T8 per svitare le due viti da 7,4 mm che tengono ferma la copertura posteriore.

Durante questa riparazione, tieni traccia di ogni vite ed assicurati di riavvitarla esattamente da dove veniva per evitare di danneggiare la tua console.

[title] Remove the back panel screws
+[* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your console.
[* red] Use a T8 Torx driver to remove the two 7.4 mm‑long screws securing the back panel.
-[* icon_note] Throughout this repair, [product|IF145-167-4|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from to avoid damaging your console.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.