Repariere deine Sachen Community Store

iPhone 5s 前面板组件更换

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 32 Anleitungen, die diese beinhalten.

Zurück zur Anleitung
Englisch
Chinesisch
Schritt 7
iPhone 5s Front Panel Assembly Replacement, Start lifting the front panel assembly: Schritt 0, Bild 1 von 1
Start lifting the front panel assembly

  • The front panel is attached with clips, and there are several ribbon cables connecting it to the rest of the phone. Your goal here is to release the clips and open the phone only enough to disconnect the cables. Go slowly and carefully to avoid damage.

  • Make sure the suction cup is firmly attached to the front panel assembly near the home button.

  • While holding the iPhone down with one hand, pull up on the suction cup to slightly separate the home button end of the front panel from the rear case.

  • With a plastic opening tool, gently pry the edges of the rear case down, away from the front panel assembly, while you pull up with the suction cup.

  • Take your time and apply firm, constant force. The front panel assembly is a much tighter fit than on most other devices.

开始提起前面板组件

屏幕通过卡扣固定在机身，并且有几条带状电线连接着屏幕和机身。你的目标是把卡扣脱离，然后打开足够的空间用来分离电线就可以了。所以在操作时你需要非常缓慢，谨慎地避免损坏电线。

确保吸盘紧紧地吸附在home键附近的前面板组件上。

一只手固定好iPhone机身，另一只手轻轻地把机身从前面板底端的home键上分离。

当你左手使用吸盘拉动的时候，右手用塑料撬棒在后机壳边缘处，轻轻地撬动，使屏幕和机身分离。

慢慢来，使用恒力操作。前面板组件比其它电子设备紧得多。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.