Zum Hauptinhalt wechseln

iPhone 5s 顶部排线更换

Englisch
Chinesisch

Informationen zur Anleitung

= Fertig = Unvollständig
    Use this guide to replace the upper component cable containing the flash, microphone, and sleep/power button cable of an iPhone 5s.
    This guide requires removing the battery. Removing the battery with the adhesive strips is the safest method, but also leaves your battery without adhesive. When replacing your battery, use a piece of double-sided tape to secure it. The battery is pretty tightly secured in the device, but the tape will keep it from rattling.
    '''You can also use this guide to replace the [https://www.ifixit.com/Guide/iPhone+5s+Upper+Component+Cable+Replacement/20280#s57896|logic board antenna bracket] and [https://www.ifixit.com/Guide/iPhone+5s+Upper+Component+Cable+Replacement/20280#s57898|contact clip].'''
    [video|https://www.youtube.com/watch?v=cJUKOvFQUWU]

      Anleitungsschritte

      1. Schritt

      松开把音量键和静音键固定在左侧边框上的螺丝:

      2. Schritt

      用撬棒把静音键从左侧边框拨出。

      3. Schritt

      用撬棒把左侧边框上的音量键拨出。

      4. Schritt

      用镊子取出把后置摄像头固定在后盖的胶片垫。

      5. Schritt

      松开把逻辑主板天线支架固定在后盖上的1.3mm飞利浦#000号螺丝。

      6. Schritt

      取出逻辑主板上的天线支架。

      7. Schritt

      松开固定链接片和电源键支架的2.1mm飞利浦#000号螺丝。

      8. Schritt

      从机身中取出链接片。

      9. Schritt

      将平口撬棒插入顶部排线下方滑动使其与后盖分离。

      10. Schritt

      滑动平口撬棒在靠近音量键的排线下方。

      11. Schritt

      用撬棒的尖头挑起前置排线与振子接触点固定在后盖上的胶贴。

      12. Schritt

      用撬棒的尖头把扬声器排线从后盖上分离出来。

      13. Schritt

      用镊子从后盖上取出电源键固定支架。

      14. Schritt

      用撬棒尖头把电源键向机身内侧拨动。

      15. Schritt

      取出把电源键固定机身中的卡扣。

      16. Schritt

      从机身中取出顶部排线。

      Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.