Repariere deine Sachen Community Store

MacBook Pro 15" Retina 显示屏 2013 晚期 逻辑板组件更换

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 15 Anleitungen, die diese beinhalten.

Zurück zur Anleitung
Englisch
Chinesisch
Schritt 9
MacBook Pro 15" Retina Display Late 2013 Logic Board Assembly Replacement: Schritt 0, Bild 1 von 2 MacBook Pro 15" Retina Display Late 2013 Logic Board Assembly Replacement: Schritt 0, Bild 2 von 2

  • Lifting from the side nearest the battery, rotate the logic board toward the top of the MacBook Pro.

  • You may need to slide the logic board a few millimeters to the left in order to get clearance for the ports along the right edge of the board.

  • Using the flat end of a spudger, carefully push the MagSafe 2 connector out of its socket on the bottom of the logic board.

  • Disconnecting the MagSafe 2 connector can be difficult. If you are only removing the logic board to temporarily get it out of the way, such as for a battery replacement, you may find it easier to simply remove the two 2.5 mm T5 Torx screws securing the MagSafe DC-In board, and then remove the logic board and MagSafe board together.

从靠近电池的一侧抬起，将主板向MacBook Pro的顶部旋转。

你可能需要将主板向左滑动几毫米，以便沿着电路板右边缘的端口获得间隙。

使用挑线器的扁平端，小心地将MagSafe 2连接器从主板底部的插座中拔出。

分离MagSafe 2链接会比较困难。如果你只是想暂时的将主板的位置挪一下例如换电池,你可以看看这篇指南 remove the two 2.5 mm T5 Torx screws securing the MagSafe DC-In board, 然后将主板和MagSafe一起卸下。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.