Repariere deine Sachen Community Store

iPod Touch第4代前面板更换

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 8 Anleitungen, die diese beinhalten.

Zurück zur Anleitung
Englisch
Chinesisch
Schritt 4
iPod Touch 4th Generation Front Panel Replacement: Schritt 0, Bild 1 von 2 iPod Touch 4th Generation Front Panel Replacement: Schritt 0, Bild 2 von 2

  • Due to the construction of the 4th generation Touch, the digitizer cable cannot be disconnected until the logic board is removed. Use extreme caution when handling the front panel assembly, as it is attached to the rest of the Touch by the very delicate digitizer cable.

  • Also, the display data cable is very short and is connected to the logic board near the top of the front panel assembly. If it does not become disconnected while freeing the top edge of the front panel assembly, be sure to disconnect it with an iPod opening tool before rotating the front panel assembly out of the Touch.

  • Carefully pull the top of the front panel assembly away from the adhesive holding it to the Touch, minding the short digitizer cable connecting the two components.

因为第四代Touch的构造，除非主板被移除，否则数字转换器电缆不能断开。 处理前面板部件时要特别小心，因为它是通过非常精致的数字转换器电缆连接到Touch的其余部分的。

此外，显示数据电缆非常短，并连接到前面板组件顶部附近的主板。 如果在取下前面板组合件的顶部边缘时没有断开连接，请在将前面板组合件从Touch上取下之前，务必用工具将其断开。

小心地将前面板组件的顶部分离粘合剂，将其固定在Touch上，注意连接两个组件的短数字转换器电缆。

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.