Zum Hauptinhalt wechseln

Reemplazo de la CPU Dell OptiPlex GX260

Englisch
Spanisch

Schritt 2 übersetzen

Schritt 2
Dell OptiPlex GX260 CPU Replacement: Schritt 0, Bild 1 von 2 Dell OptiPlex GX260 CPU Replacement: Schritt 0, Bild 2 von 2
  • Carefully release the ZIF socket - push the lever backwards to release it from the hold down tab and lift it up and to the left until it stops (roughly 90 degrees).

  • Gently lift the CPU straight up and out of the socket. There should be no resistance.

  • The CPU will only fit into the ZIF socket in one orientation so take care when reinserting it. make sure that pin A1 is located correctly

  • Take care not to bend the pins on the CPU

Libere con cuidado la toma ZIF: empuje la palanca hacia atrás para liberarla de la pestaña de sujeción y levántela hacia arriba y hacia la izquierda hasta que se detenga (aproximadamente 90 grados).

Levanta suavemente la CPU hacia arriba y fuera del zócalo. No debería haber resistencia.

La CPU solo cabe en el zócalo ZIF en una orientación, así que tenga cuidado al volver a insertarla. asegúrese de que el pin A1 esté ubicado correctamente

Tenga cuidado de no doblar los pines de la CPU

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.