Zum Hauptinhalt wechseln

Hinweis: Du bearbeitest eine grundständige Anleitung. Alle Änderungen, die du vornimmst, betreffen alle 25 Anleitungen, die diese beinhalten.

Englisch
Chinesisch
Schritt 3
Slide the pick along the bottom edge of the phone to slice through the adhesive securing the rear glass. Afterward, it may help to leave the pick in place and grab a second pick as you proceed to the next step. Leaving the pick inserted can help prevent the glue you just separated from re-adhering.
  • Slide the pick along the bottom edge of the phone to slice through the adhesive securing the rear glass.

  • Afterward, it may help to leave the pick in place and grab a second pick as you proceed to the next step. Leaving the pick inserted can help prevent the glue you just separated from re-adhering.

  • Re-heat the rear glass as needed to prevent the glue from cooling and hardening.

本步骤还使用了一个塑料撬片,用来将后部面板从中框分离。如果双面胶的粘性仍然很强,用iOpener再加热一次。

使用吸盘在面板中部用力,旋转你的手腕向上拉后部的边缘。

-[* icon_note] The following steps involve using an opening pick to separate the rear panel from the midframe. If the adhesive is too strong, reapply heat with the iOpener.
-[* black] Using the suction cup, apply pressure to the middle section of the panel while pulling up the lower edge by pivoting your wrist.
+[* black] Slide the pick along the bottom edge of the phone to slice through the adhesive securing the rear glass.
+[* icon_note] Afterward, it may help to leave the pick in place and grab a second pick as you proceed to the next step. Leaving the pick inserted can help prevent the glue you just separated from re-adhering.
+[* icon_note] Re-heat the rear glass as needed to prevent the glue from cooling and hardening.

Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.