Hinweis: Du bearbeitest gerade eine grundständige Anleitung, die Teil der Anleitung ist, die du eben angeschaut hast. Alle Änderungen, die du vornimmst, betreffen alle 2 Anleitungen, die diese grundständige Anleitung beinhalten.
Schritt 1 übersetzen
Schritt 1
-
Close and flip the device over so you can have a good view of all the screws.
-
Locate and remove the three 3.9mm screws where the battery was removed from.
-
Locate and and remove the two 5.8mm screws located underneath the bumpers.
-
Locate and remove the three 5.8mm remaining screws at the top of the device.
Deine Beiträge sind lizenziert unter der Open-Source Creative Commons Lizenz.