Zum Hauptinhalt wechseln

Einleitung

Whether your hard drive died, you need more space, or need faster speeds, this guide will show you how to replace the hard drive in your ASUS N56JN Laptop.

  1. To prevent injury, make sure the laptop is unplugged before removing the battery. To prevent data loss, make sure the laptop has fully shut down before removing the battery. Pull the switch on the back of laptop in the direction of the arrow.
    • To prevent injury, make sure the laptop is unplugged before removing the battery.

    • To prevent data loss, make sure the laptop has fully shut down before removing the battery.

    • Pull the switch on the back of laptop in the direction of the arrow.

    • If done correctly the battery should pop out. Lift the battery to remove it.

  2. Use the screwdriver to remove the rubber cap on the top of the backplate. Use the screwdriver to remove the rubber cap on the top of the backplate.
    • Use the screwdriver to remove the rubber cap on the top of the backplate.

  3. Remove the screw that was uncovered. Pull the backing plate away from the laptop. This will take a fair amount of force.
    • Remove the screw that was uncovered.

    • Pull the backing plate away from the laptop.

    • This will take a fair amount of force.

  4. MacBook Akku Fix Kits

    Ab $69.99

    Buy Now

    MacBook Akku Fix Kits

    Ab $69.99

    Buy Now
  5. Remove the four screws located in the corners of the metal bracket. Three of the four screws are the same size. The exception is the bottom left screw, which is significantly shorter. Make sure to put the short screw where it belongs when re-assembling. Three of the four screws are the same size. The exception is the bottom left screw, which is significantly shorter. Make sure to put the short screw where it belongs when re-assembling.
    • Remove the four screws located in the corners of the metal bracket.

    • Three of the four screws are the same size. The exception is the bottom left screw, which is significantly shorter. Make sure to put the short screw where it belongs when re-assembling.

  6. Push the hard drive away from the center until fully disconnected. Lift the hard drive from the bottom right tab to remove it from the laptop. Lift the hard drive from the bottom right tab to remove it from the laptop.
    • Push the hard drive away from the center until fully disconnected.

    • Lift the hard drive from the bottom right tab to remove it from the laptop.

  7. Remove the four screws on the side of the hard drive and bracket. Remove the four screws on the side of the hard drive and bracket. Remove the four screws on the side of the hard drive and bracket.
    • Remove the four screws on the side of the hard drive and bracket.

  8. Remove the hard drive from the bracket. Remove the hard drive from the bracket.
    • Remove the hard drive from the bracket.

  9. Insert the new hard drive into the bracket. Insert the new hard drive into the bracket.
    • Insert the new hard drive into the bracket.

Abschluss

To reassemble your device, follow instructions 1-6 in the reverse order.

5 weitere Nutzer haben diese Anleitung absolviert.

Sebastian Jordan

Mitglied seit: 11.10.2015

227 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 14-6, Green Fall 2015 Mitglied von Cal Poly, Team 14-6, Green Fall 2015

CPSU-GREEN-F15S14G6

5 Mitglieder

4 Anleitungen geschrieben

That’s not rocket science - How to clone the disk properly? that’s the part I can’t manage… Any freeware clone software that actually WORKS and is not just a dumb backup software…?

Günther Haschberger - Antwort

The free version of Minitool Partition Wizard is very good.

Edward Falk -

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 7

Letzte 7 Tage: 43

Letzte 30 Tage: 193

Insgesamt: 5,959