Einleitung

This mouse was designed with usability in mind taking little to no effort to fix anything.

  1. Use the screwdriver to remove the stickers hiding the screws marked in red.
    • Use the screwdriver to remove the stickers hiding the screws marked in red.

    Kommentar hinzufügen

  2. Remove the 4 screws to continue.
    • Remove the 4 screws to continue.

    Kommentar hinzufügen

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Pry the center of the mouse apart to separate the upper and lower housing of the boards.

    Kommentar hinzufügen

    • Remove the wires from the white crimp headers. This will separate the upper and lower housing units of the mouse.

    • Don't pull the wires too hard, as they might break.

    Kommentar hinzufügen

    • Pull the Scroll wheel, in red, to the left to remove it.

    • This may take some force to remove. Make sure to pull it parallel to the board, instead of perpendicularly.

    • Replace/clean if needed.

    • If your mouse still doesn't work after this step, please continue onto the next step.

    Kommentar hinzufügen

    • Desolder these 3 pins and solder the replacement part in.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Vincent Lee

Mitglied seit 23.01.2014

361 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 1-39, Maness Winter 2014 Mitglied von Cal Poly, Team 1-39, Maness Winter 2014

CPSU-MANESS-W14S1G39

4 Mitglieder

8 Anleitungen geschrieben

Hi Vincent, could you please help me with finding a place where this rotation sensor can be bought. I'm not even sure how this part is called so searching for it is quite tricky.

Cheers,

Michal

Michal Rorat - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 14

Letzte 30 Tage: 53

Insgesamt: 4,226