Einleitung

This guide will show you how to remove an inner tube from a bicycle tire. The process is the same for both front and rear wheels, even though this guide demonstrates the process on the rear wheel. While some components on your bicycle may be different than those shown here, the process will be the same.

Werkzeuge

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Flip the quick release lever on the wheel.
    • Flip the quick release lever on the wheel.

    Kommentar hinzufügen

  2. Squeeze the brake arms together and lift the brake cable from the caliper arms.
    • Squeeze the brake arms together and lift the brake cable from the caliper arms.

    Kommentar hinzufügen

  3. Kostenloser Versand bei Bestellungen über 20 $
    Verwende den Code BLUEANDBLACK an der Kasse
    Kostenloser Versand bei Bestellungen über 20 $
    Verwende den Code BLUEANDBLACK
    • Hold the wheel to the ground, and pull the bike frame up and away to remove the wheel from the bike.

    Kommentar hinzufügen

    • Press the valve core while applying pressure to the tire to deflate the tire.

    Kommentar hinzufügen

    • Insert the flat part of a tire lever under the tire coping. Apply pressure to the other end of the lever to lift the tire up and out of the wheel.

    • Slide the lever around the circumference of the wheel to completely remove the tire.

      • Alternatively, if you have multiple tire levers, see if you can clip the first lever to a spoke to keep it in place. Then insert the second lever a few inches away. Clip it to a spoke. Insert the third lever a few more inches along. Take out the second lever and insert it it a few inches past the third. Work along the rim until the tire pops off.

    Kommentar hinzufügen

    • Remove the tube by pushing the valve through the hole in the rim and pulling the tube out from under the tire.

    Kommentar hinzufügen

Abschluss

Re-insert the tube into the tire, and align the tube with the hole in the rim. Using the plastic tire levers, re-seat the tire on the rim. When inflating the tire, proceed slowly, ensuring that the bead is seated properly on the rim.

4 weitere Nutzer haben diese Anleitung absolviert.

Brett Hartt

Mitglied seit 12.04.2010

108.448 Reputation

138 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Community

114 Mitglieder

7.040 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 2

Letzte 7 Tage: 13

Letzte 30 Tage: 37

Insgesamt: 5,454