Einleitung
Replacing the Canon-PowerShot G12 HDMI port is a highly-invasive step-intensive process that becomes necessary if the HDMI port sustains damage due to a crack, water, or jams, or if the HDMI port no longer functions properly.
In this guide, you will learn how to replace the HDMI port carefully without damaging any essential internal components.
Was du brauchst
-
-
Open the back cover of the camera, see steps 1-6 in Canon PowerShot G12 Rear Function Setting Dial Replacement
-
-
-
-
On the right side of the camera looking from the back, locate the HDMI port and use a spudger to remove it.
-
-
-
Insert the new HDMI port until you hear a click on both sides, ensuring the holes match up with the ports on the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team 1-5, Leahy Winter 2015 Mitglied von USF Tampa, Team 1-5, Leahy Winter 2015
USFT-LEAHY-W15S1G5
3 Mitglieder
6 Anleitungen geschrieben
