Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Einleitung

If the motor of your Dewalt DCD778 is not operating properly or not operating at all, this guide will show you how to replace the motor of your drill.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Grab the drill in one hand and cup the battery (located at the bottom of the drill) with the other hand.
    • Grab the drill in one hand and cup the battery (located at the bottom of the drill) with the other hand.

  2. Use your other hand to push down on the yellow button on the battery.
    • Use your other hand to push down on the yellow button on the battery.

  3. Pull the battery in a horizontal direction away from the drill.
    • Pull the battery in a horizontal direction away from the drill.

  4. Manta Precision Bit Set

    112 Bits für jede Reparatur.

    Upgrade Your Toolbox

    Manta Precision Bit Set

    Upgrade Your Toolbox
  5. Remove the eight 16 mm, Torx Security #15 screws.
    • Remove the eight 16 mm, Torx Security #15 screws.

  6. Lay the drill on its side and gently lift the top half off it.
    • Lay the drill on its side and gently lift the top half off it.

  7. Lift the drill mechanism out of the shell.
    • Lift the drill mechanism out of the shell.

    • Desolder the red and black wires from the motor.

  8. Slightly twist and pull motor away from the clutch. Slightly twist and pull motor away from the clutch.
    • Slightly twist and pull motor away from the clutch.

  9. When installing the replacement motor into the clutch make sure you correctly align the gears in order to assure that the motor is properly fitted to the clutch.
    • When installing the replacement motor into the clutch make sure you correctly align the gears in order to assure that the motor is properly fitted to the clutch.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Brittany

Mitglied seit: 09.03.2019

621 Reputation

5 Anleitungen geschrieben

Team

Casper College, Team S1-G5, Lareau Spring 2019 Mitglied von Casper College, Team S1-G5, Lareau Spring 2019

CASC-LAREAU-S19S1G5

4 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 4

Letzten 30 Tage: 16

Insgesamt: 234