Zum Hauptinhalt wechseln

Door Mirror Replacement

Was du brauchst

  1. Door Mirror Replacement, Door Mirror: Schritt 1, Bild 1 von 1
    • Use a screwdriver to remove the two brackets securing the top of the mirror.

    • The mirror will fall forward once the two top brackets are released; be sure to support the mirror as you unscrew the brackets.

    • The type of screwdriver needed will depend on your specific brackets.

  2. Door Mirror Replacement: Schritt 2, Bild 1 von 1
    • Lift the broken mirror off of the door.

    • Remove any cardboard or other cushioning (if any) from the door.

  3. Door Mirror Replacement: Schritt 3, Bild 1 von 1
    • Loosen, but don't remove, the bottom brackets to accommodate the width of the new mirror.

  4. Door Mirror Replacement: Schritt 4, Bild 1 von 1
    • If you have new mirror supports, then remove the old brackets entirely and replace them with the new brackets.

  5. Door Mirror Replacement: Schritt 5, Bild 1 von 1
    • Replace any cushioning behind the mirror.

    • While supporting the top of the mirror, set the mirror into the bottom brackets, then tighten the brackets.

  6. Door Mirror Replacement: Schritt 6, Bild 1 von 1
    • Replace the top brackets and tighten them to full secure the mirror.

Abschluss

Enjoy your new mirror!

Seth Wanderman

Mitglied seit: 02/28/22

133 Reputation

1 Anleitung geschrieben

Team

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 2

Letzte 30 Tage: 8

Insgesamt: 542