Zum Hauptinhalt wechseln

Entfernen der oberen Abdeckung bei einer Fujifilm X-T10

Was du brauchst

  1. Entfernen der oberen Abdeckung bei einer Fujifilm X-T10, Entferne die Linse, den Akku und die SD-Karte: Schritt 1, Bild 1 von 2 Entfernen der oberen Abdeckung bei einer Fujifilm X-T10, Entferne die Linse, den Akku und die SD-Karte: Schritt 1, Bild 2 von 2
    • Entferne die Linse.

    • Drehe die Kamera um, damit das Akkufach nach oben zeigt.

    • Schiebe den Knopf nach oben, um das Akkufach zu öffnen.

    • Schiebe den orangenen Knopf nach oben, um den Akku auszuwerfen.

    • Drücke auf die SD-Karte, um diese entfernen zu können.

    • Die Linse, der Akku und die SD-Karte werden in den Bildern nicht gezeigt.

  2. Entfernen der oberen Abdeckung bei einer Fujifilm X-T10, Entferne die Schrauben auf der Seite: Schritt 2, Bild 1 von 1
    • Löse die beiden 4,3 mm langen Kreuzschlitzschrauben von beiden Seiten der Kamera.

  3. Entfernen der oberen Abdeckung bei einer Fujifilm X-T10, Die Schauben auf der Unterseite: Schritt 3, Bild 1 von 1
    • Löse die drei 3,7 mm langen Kreuzschlitzschrauben von der Unterseite der Kamera.

  4. Entfernen der oberen Abdeckung bei einer Fujifilm X-T10, Die Schrauben hinter dem LCD: Schritt 4, Bild 1 von 1
    • Löse die beiden 3,7 mm langen Kreuzschlitzschrauben.

    • Löse die 3,1 mm lange Kreuzschlitzschraube.

    • Löse die beiden 3,2 mm langen Kreuzschlitzschrauben.

    • Achte beim Zusammenbauen darauf, dass du die richtigen Schraubenlängen in den richtigen Löchern verwendest.

  5. Entfernen der oberen Abdeckung bei einer Fujifilm X-T10, Entferne die untere Abdeckung: Schritt 5, Bild 1 von 2 Entfernen der oberen Abdeckung bei einer Fujifilm X-T10, Entferne die untere Abdeckung: Schritt 5, Bild 2 von 2
    • Heble vorsichtig und schiebe die untere Abdeckung nach unten.

  6. Entfernen der oberen Abdeckung bei einer Fujifilm X-T10, Entferne die hintere Baugruppe mit dem LCD: Schritt 6, Bild 1 von 1
    • Arbeite bei diesem Schritt langsam. Es besteht die Chance, dass du das Flachbandkabel beschädigst.

    • Fange an zu hebeln und hebe die hintere Baugruppe mit dem LCD an.

    • Um das Flachbandkabel auszustecken, klappe den weißen Riegel auf dem großen ZIF-Anschluss mit dem flachen Ende eines Spatels nach oben.

  7. Entfernen der oberen Abdeckung bei einer Fujifilm X-T10, Stecke die Flachbandkabel aus: Schritt 7, Bild 1 von 1
    • Um das Flachbandkabel zu entfernen, klappe den schwarzen Riegel auf dem Anschluss mit dem flachen Ende des Spatels nach oben.

    • Ziehe die Flachbandkabel vorsichtig aus den Anschlüssen heraus.

  8. Entfernen der oberen Abdeckung bei einer Fujifilm X-T10, Löse die Schrauben der oberen Baugruppe: Schritt 8, Bild 1 von 1
    • Entferne die beiden 2,1 mm langen Kreuzschlitzschrauben.

    • Die Schraube auf der rechten Seite ist hinter einem Flachbandkabel und etwas Klebeband.

    • Entferne die 6 mm langen Kreuzschlitzschrauben aus dem Inneren des Gehäuses.

  9. Entfernen der oberen Abdeckung bei einer Fujifilm X-T10, Entferne die obere Baugruppe: Schritt 9, Bild 1 von 1
    • Heble vorsichtig und entferne die obere Baugruppe vom Rest.

    • FERTIG!

    • Um dein Gerät wieder zusammenzubauen, befolge die Anleitung in umgekehrter Reihenfolge.

    Thank you very much the detailed instruction. I should replace the whole eyecap unfortunatelly. Can you help me how could I replace it after I disassembled the camera follow your instruction? How is that part assembled?

    Thank you!

    V. Péter - Antwort

    Hi, could you share an image of exactly which piece is broken and you want to change? As I am looking at my X-T10 it does not have the usual big rubber eyecap that you can see in X-T2, DSLRs or similar cameras :)

    Rimvydas -

    Hi,

    Thank you for your answer.

    No unfortunatelly it is not only a removable eyecap. It is the whole viewfinder cover. The material of this piece began to break down. Nobody knows why. I can share some photo with you.

    Thank you for your kindly help in advance!

    V. Péter -

    OK, I see… It does look strange.

    I will keep it in mind to do a more detailed top part dissassembly guide so you could separate that part. But since I am just a hobbyist myself I can’t give you an answer when I will find time for it :)

    Hope you understand :)

    This is a lovely camera and enjoy it while it works, luckily it is not something that stops it from working :)

    Rimvydas -

    Thank you very much. Do you know when could you share the details with me? I would like to repair my camera.

    Thanks!

    V. Péter -

    I've used this guide to successfully repair my Fujifilm X-T20, thank you!

    Guido Santacroce - Antwort

Abschluss

Befolge die Anleitung in umgekehrter Reihenfolge, um dein Gerät wieder zusammenzubauen.

9 weitere Personen haben diese Anleitung absolviert.

Besonderer Dank geht an diese Übersetzer:innen:

en de

100%

Cafugo hilft uns, die Welt in Ordnung zu bringen! Wie kann ich mithelfen?
Hier starten ›

Rimvydas

Mitglied seit: 03/29/12

748 Reputation

2 Anleitungen geschrieben

10 Kommentare

Hello community,

my x-t10 is broken: as soon as the camera lens attaches, the screen (also EVF) was blinking, switching on and off, after roughly 20s LCD displays "Lens Error". As described in detail in this post (https://www.fuji-x-forum.com/topic/8121-...), some people were able to disassemble the motherboard and change broken fuses.

Can someone help me to find the correct spare part fuse?

Is there a manual for changing fuses from a motherboard?

Unfortunately I do not have any experience with such projects.

Thanks in advance

Juri

berlinerjuri - Antwort

Hi Juri,

Personally I am not a complete beginner, but was not able to identify which is a broken part.

Ended up replacing the motherboard and in the meantime made this manual.

If you feel comfortable in soldering and have patience for microscopic things try to watch some youtube videos about SMD soldering, motherobard repairs, broken fuse and capacitors identification.

You will also likely to need hot air station, as parts are really microscopic, and regular soldering iron will be too large.

Spare fuses can be found for example in DigiKey, or AliExpress.

Best of luck! and please share your experience if you manage to fix it!
I may be able to fix my old board too and make new tutorial as this seems common issue with this camera.

Rimvydas -

Does anyone know what type of fuse this mainboard uses? I saw the issue on the fuji link and figured I'd ask here. Looking to replace the fuses on mine but am not sure what Ampfuse to use. Thanks

UltimateProcrastinator - Antwort

Hi, I think I researched what each letter means, and ordered those:

https://www.aliexpress.com/item/40004126...

https://www.aliexpress.com/item/40008129...

But did not have any luck repairing the board.
Please post about what worked or not for you :)

Rimvydas -

Would love to see X T 3 repair I need a new internal battery

al hardy - Antwort

Hello everyone,

I am looking to replace the joystick (navigation lever) on my Fujifilm X-T30 camera. I found the replacement part online and I am wondering if it is easily replaceable or if it is soldered in and requires desoldering the old part and soldering in the new one. Your advice and insights would be greatly appreciated.

Thank you in advance for your assistance!

Daniele Duranti - Antwort

In addition to the previous question, I'm also considering replacing the top “shell” of my Fujifilm X-T30 camera due to wear and tear. I found a replacement part online, but it comes without buttons, flash, and electronics. I'm wondering if it's possible to easily transfer these components from the old “shell” to the new one. Any advice or suggestions on this matter would be greatly appreciated.

Thank you for your help!

Daniele Duranti - Antwort

My camera resets every time I turn it off, so I guess it something related with an internal battery. Do you know where it could be? It’s a X-T20

Jose MO - Antwort

Hi Jose, I think you are right about diagnosis. On this X-T10 it was on the motherboard. It can be that it was soldered on, it has been long time, cannot remember the model of the battery and exactly the place om the motherboard, but when you take it out it is obvious, and you can see small text on battery to order the same type online 😊

Rimvydas -

Hi there, would anyone know what cable would be attatched the full auto lever found beneath the shutter speeds dial ? My xt-20 is stuck in full auto mode, and moving the lever does nothing so i assume a contact may be dodgy

Dion Gatea - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 10

Letzte 7 Tage: 58

Letzte 30 Tage: 194

Insgesamt: 9,376