1. Disconnect the DC 6V IN power cable from the device.
    • Disconnect the DC 6V IN power cable from the device.

    • Remove the 3 front panel screws on the bottom of the device.

  2. Carefully pry off the front panel of the device to reveal the button in need of replacement.
    • Carefully pry off the front panel of the device to reveal the button in need of replacement.

  3. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Pull firmly on the button in need of replacement to free it from its housing. Pull firmly on the button in need of replacement to free it from its housing.
    • Pull firmly on the button in need of replacement to free it from its housing.

  5. Push the replacement button into its new housing.
    • Push the replacement button into its new housing.

  6. Snap the front panel back into place and re-insert the 3 front panel screws, completing the replacement.
    • Snap the front panel back into place and re-insert the 3 front panel screws, completing the replacement.

Abschluss

The system selector button should now be working properly.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Jared

Mitglied seit: 28.10.2013

201 Reputation

2 Anleitungen geschrieben

Team

University of Maryland, Team 4-6, Vijaybhaskar Fall 2013 Mitglied von University of Maryland, Team 4-6, Vijaybhaskar Fall 2013

UMD-VIJAYBHASKAR-F13S4G6

4 Mitglieder

2 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 3

Insgesamt: 259