Einleitung
Use this guide to replace the LCD on your HP ElitePad 900.
Was du brauchst
-
-
Unscrew the two 2.8mm Phillips #000 screws near the power connector.
-
-
-
-
Remove the four 1.6mm Phillips #000 screws securing the LCD to the digitizer.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.