Zum Hauptinhalt wechseln

Hover-1 Titan Bottom Left Panel Replacement

Grundständige Anleitung
Dies ist eine grundständige Anleitung, die nur als Teil einer anderen Anleitung verwendet werden sollte.

Was du brauchst

  1. Hover-1 Titan Bottom Left Panel Replacement, Bottom Left Panel: Schritt 1, Bild 1 von 2 Hover-1 Titan Bottom Left Panel Replacement, Bottom Left Panel: Schritt 1, Bild 2 von 2
    • Flip the hoverboard so the bottom is facing up.

    • The left side is the side that has the charge port. There is also an "L" on the metal plate underneath the wires.

  2. Hover-1 Titan Bottom Left Panel Replacement: Schritt 2, Bild 1 von 2 Hover-1 Titan Bottom Left Panel Replacement: Schritt 2, Bild 2 von 2
    • Using a Phillips #1 screwdriver, remove the two 14 mm screws located closest to the center of the hoverboard.

    • Using a Phillips #1 screwdriver, remove the four 12 mm screws located in the middle of the panel.

    • Using a Phillips #1 screwdriver, remove two 15 mm screws located closest to the wheel.

  3. Hover-1 Titan Bottom Left Panel Replacement: Schritt 3, Bild 1 von 3 Hover-1 Titan Bottom Left Panel Replacement: Schritt 3, Bild 2 von 3 Hover-1 Titan Bottom Left Panel Replacement: Schritt 3, Bild 3 von 3
    • Grip the bottom left panel and lift up to remove.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Dana Ebe

Mitglied seit: 10/08/18

238 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team S15-G4, White Fall 2018 Mitglied von Cal Poly, Team S15-G4, White Fall 2018

CPSU-WHITE-F18S15G4

4 Mitglieder

10 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 44