Einleitung
The video below details how to wirelessly transfer data from your previous 2DS/3DS systems to the New 3DS XL. If you'd prefer to do a physical transfer, our guide will show you how to manually transfer the data off of your old 2DS/3DS SD card onto the microSD card of the New 3DS XL.
Was du brauchst
Einführungsvideo
-
-
Start by removing the stylus from the frame of the New 3DS XL.
-
-
-
-
Loosen the two captive Phillips #1 screws on the back of the device.
-
Prying from the thumb slots on each side, pull the rear panel off the back of the device.
-
-
-
Press the microSD card slightly deeper into its slot until you hear a click.
-
After the click, release the card and it will pop out of its slot.
-
Use a PC to copy the data from the source SD card to the New 3DS XL microSD card.
-
You may need a micro SD to SD adapter.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
4 weitere Nutzer:innen haben diese Anleitung absolviert.