Repariere deine Sachen Community Store

LG G Watch Spring Bar Pin Replacement

Einleitung

Use this guide to replace the spring bar pins on your LG G Watch.

Was du brauchst

  1. LG G Watch Spring Bar Pin Replacement, Wristband: Schritt 1, Bild 1 von 1

    • Spring bars attach the two halves of the wristband to the watch body. The spring bar has a shoulder on either end.

    • Be prepared to apply some pressure with your fingers to perform the following action.

    • First, slide the wristband down on the spring bar to expose the shoulder of the spring bar.

    • Grasp the exposed shoulder with the tweezers to perform the next step.

    Bearbeiten

  3. LG G Watch Spring Bar Pin Replacement: Schritt 2, Bild 1 von 2 LG G Watch Spring Bar Pin Replacement: Schritt 2, Bild 2 von 2

    • This is a challenging step. Do it carefully to prevent the spring bar from flying out of the wristband.

    • Use the tweezer to depress the spring bar so that it collapses by a few millimeters and pops out of the hole that was holding it in place.

    • Now carefully pull the other end of the spring bar to detach the wristband from the watch face.

    • Repeat steps 1 and 2 for the other wristband.

    Bearbeiten

  4. LG G Watch Spring Bar Pin Replacement, Spring Bar Pin: Schritt 3, Bild 1 von 1

    • Slide the spring bar pin out of the wristband.

    • Repeat this step for the other wristband.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Autor:in

Geoff Wacker

Mitglied seit: 09/30/13

89.934 Reputation

89 Anleitungen geschrieben

Auszeichnungen: 44

+ 41 weitere Auszeichnungen

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 3

Insgesamt: 1,015