Einleitung
Prereq for upper case replacement.
Was du brauchst
-
-
Use the flat end of a spudger to pry the left speaker off the adhesive securing it to the upper case.
-
Remove the left speaker from the upper case.
-
-
-
-
Use the flat end of a spudger to pry the microphone off the adhesive securing it to the left side of the upper case.
-
If needed, apply a little heat from an iOpener or hairdryer to soften the adhesive.
-
Remove the microphone from the upper case.
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.
