Zum Hauptinhalt wechseln

MerchSource the Black Series Boat Racer Remote Controller Batteries Replacement

Was du brauchst

  1. MerchSource the Black Series Boat Racer Remote Controller Batteries Replacement, Remote Controller Batteries: Schritt 1, Bild 1 von 2 MerchSource the Black Series Boat Racer Remote Controller Batteries Replacement, Remote Controller Batteries: Schritt 1, Bild 2 von 2
    • Turn the remote control over to the back.

  2. MerchSource the Black Series Boat Racer Remote Controller Batteries Replacement: Schritt 2, Bild 1 von 1
    • Slide the battery cover off in the direction of the arrow on the cover.

  3. MerchSource the Black Series Boat Racer Remote Controller Batteries Replacement: Schritt 3, Bild 1 von 2 MerchSource the Black Series Boat Racer Remote Controller Batteries Replacement: Schritt 3, Bild 2 von 2
    • Remove the batteries (2 AA).

  4. MerchSource the Black Series Boat Racer Remote Controller Batteries Replacement: Schritt 4, Bild 1 von 1
    • Replace with new batteries, preferably of same brand to avoid possible corrosion.

    • Make sure the positive and negative ends of the batteries align with the positive and negative connections in the battery compartment.

    • Check to make sure the boat is functional. If it is not powering on, consult the troubleshooting page.

Abschluss

To reassemble your device, follow these instructions in reverse order.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 3

Letzte 30 Tage: 6

Insgesamt: 193