Einleitung
This guide will take you through the process involved with removing a capacitor. De-soldering and soldering will be required.
Was du brauchst
-
-
Lift up all four rubber pads on the bottom of the router with the plastic opening tool.
-
-
-
-
Remove the clear plastic casing by lifting it straight up from the router.
-
-
-
Separate the motherboard from the top shell by lifting it straight up from the router.
-
-
-
Refer to this link for proper de-soldering and soldering techniques.
-
Pull the capacitor from the other side of the circuit board once the solder is liquified.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.
Ein Kommentar
looks like that's a 220microF at 25V right ?
probably better to replace it with a similar 220microF, but with higher voltage rating.