Was du brauchst
-
-
Slide the battery release lever found on the bottom of the camera in the direction of the front of the camera.
-
-
-
-
Remove the battery from its holding spot/where it mounts to the camera.
-
Inspect the contact points and be sure that there isn't any debris that could be resulting in loss of current flow.
-
Fast fertig!
To reassemble your device, follow these instructions in reverse order.
Abschluss
To reassemble your device, follow these instructions in reverse order.
Team
Embry-Riddle Aeronautical University, Team S1-G3, Watkins Fall 2019 Mitglied von Embry-Riddle Aeronautical University, Team S1-G3, Watkins Fall 2019
ERAU-WATKINS-F19S1G3
4 Mitglieder
14 Anleitungen geschrieben
