Zum Hauptinhalt wechseln

Einleitung

When a zipper pull breaks, or the slider simply wears out, you don’t need to replace the entire zipper. Just replace the zipper slider. This is a quick repair that can make the difference between a zipper that doesn’t work at all and one that works like it’s brand new. Determine the size of your replacement slider by looking on the bottom of your existing slider.

For replacement parts or further assistance, contact Patagonia Customer Service.

Ersatzteile

Keine Ersatzteile angegeben.

Einführungsvideo

  1. Locate the top of the zipper on the side with the slider. Peel back any fabric that is covering the zipper stop. Peel back any fabric that is covering the zipper stop.
    • Locate the top of the zipper on the side with the slider.

    • Peel back any fabric that is covering the zipper stop.

  2. Use end nippers to cut the stop. Be sure to only cut the plastic or metal stop. You do not want to damage the webbing behind the zipper.
    • Use end nippers to cut the stop.

    • Be sure to only cut the plastic or metal stop. You do not want to damage the webbing behind the zipper.

  3. Carefully remove any remaining pieces of the stop using tweezers.
    • Carefully remove any remaining pieces of the stop using tweezers.

  4. MacBook Akku Fix Kits

    Ab $69.99

    Buy Now

    MacBook Akku Fix Kits

    Ab $69.99

    Buy Now
  5. Slide the damaged zipper slider up and off of the zipper. Slide the damaged zipper slider up and off of the zipper. Slide the damaged zipper slider up and off of the zipper.
    • Slide the damaged zipper slider up and off of the zipper.

  6. Slide the replacement slider onto the zipper. You may need to tug a little to get it past where the old stop was.
    • Slide the replacement slider onto the zipper.

    • You may need to tug a little to get it past where the old stop was.

    • Make sure that your zipper slider is facing the correct way (right-side up) when you place it onto the zipper.

  7. Grab a new zipper stop. Insert the teeth into the webbing in the same place where the old stop was located.
    • Grab a new zipper stop.

    • Insert the teeth into the webbing in the same place where the old stop was located.

  8. Use pliers to bend the metal top of the zipper stop around the edge of the webbing, poking the single tooth on the stop through the backside of the webbing. Crimp the stop into place. Crimp the stop into place.
    • Use pliers to bend the metal top of the zipper stop around the edge of the webbing, poking the single tooth on the stop through the backside of the webbing.

    • Crimp the stop into place.

Ziellinie

12 weitere Nutzer haben diese Anleitung absolviert.

Brittany McCrigler

Mitglied seit: 05.03.2012

81.465 Reputation

132 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Community

104 Mitglieder

8.414 Anleitungen geschrieben

Where do I get the zipper stop????

Jason Heimink - Antwort

How do you find the size slider(in my case 5 millimetres) and also the right size teeth that will fit into the zipper.

bbehrhorst - Antwort

I used this Guide to replace the zipper slide on my wife's favorite Disney fleece jacket. I purchased my slide and the stop online. Since I'm not sure about the rules on posting vendor's info, I will say GOOGLE "nylon coil zipper slide". You can have your "zippershipped" right to your door.

kasten39828 - Antwort

AWESOME! Thanks for the pointers - I’m ready for tomorrow’s powder day!!!!

Jenny - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 76

Letzte 7 Tage: 425

Letzte 30 Tage: 1,975

Insgesamt: 70,284