Zum Hauptinhalt wechseln

Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.

Was du brauchst

  1. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 1, Bild 1 von 3 : Schritt 1, Bild 2 von 3 : Schritt 1, Bild 3 von 3
    • Turn the laptop upside down so that the underside of the laptop is facing you.

    • Use a Phillips #000 screwdriver to unscrew the 4.3 mm screws located on the edges and corners of the laptop.

  2. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 2, Bild 1 von 1
    • Lift the cover to reveal the interior of the laptop.

  3. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 3, Bild 1 von 3 : Schritt 3, Bild 2 von 3 : Schritt 3, Bild 3 von 3
    • Unscrew the four 4.55 mm Phillips #000 screws on the edges of the battery.

  4. Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!

    : Schritt 4, Bild 1 von 2 : Schritt 4, Bild 2 von 2
    • Lift to remove the battery from the laptop.

    • Place in the new battery to match the edges located on the laptop. Push on the top edge of the battery to secure it in place.

Ziellinie

7 weitere Nutzer:innen haben diese Anleitung absolviert.

Team

Baylor, Team 2-3, Grigsby Spring 2015 Mitglied von Baylor, Team 2-3, Grigsby Spring 2015

BU-GRIGSBY-S15S2G3

4 Mitglieder

4 Anleitungen geschrieben

4 Kommentare

Could you point to the RAM modules in the pictures please

rerof - Antwort

http://www.myfixguide.com/manual/samsung...

There are no RAM modules. They are welded in the mother board.

Best regards!

Raul Lacavex -

any updated amazon product?

amitshalem - Antwort

I just bought and installed this battery from Amazon: https://www.amazon.com/gp/product/B07NW7...

Mark Wolfman -

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 7

Letzte 30 Tage: 29

Insgesamt: 12,641