Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Einleitung

This guide will explain how to replace your Samsung Chromebook 3 speakers. Before you begin you will need to remove the bottom case.

  1. Place the Chromebook face down so that the bottom case is exposed. Using a Phillips #00 screwdriver, remove nine 4.6mm screws from the back casing.
    • Place the Chromebook face down so that the bottom case is exposed.

    • Using a Phillips #00 screwdriver, remove nine 4.6mm screws from the back casing.

  2. Use a iFixit opening tool to gently pry the case up from the vent on the hinge side of the Chromebook. You should hear a popping sound as the connectors disengage inside the case. You should hear a popping sound as the connectors disengage inside the case.
    • Use a iFixit opening tool to gently pry the case up from the vent on the hinge side of the Chromebook.

    • You should hear a popping sound as the connectors disengage inside the case.

  3. Lift the case up and off the device
    • Lift the case up and off the device

  4. Disconnect the battery from the motherboard by prying upwards on the cable connector with a spudger. Disconnect the battery from the motherboard by prying upwards on the cable connector with a spudger.
    • Disconnect the battery from the motherboard by prying upwards on the cable connector with a spudger.

  5. Remove one 4.9mm silver screw from each speaker with a Phillips #00 screwdriver. Remove one 4.9mm silver screw from each speaker with a Phillips #00 screwdriver. Remove one 4.9mm silver screw from each speaker with a Phillips #00 screwdriver.
    • Remove one 4.9mm silver screw from each speaker with a Phillips #00 screwdriver.

  6. Use a plastic spudger to gently coax the cable connecter sideways from the motherboard and the left speaker. When disconnected, remove speaker. Use a plastic spudger to gently coax the cable connecter sideways from the motherboard and the left speaker. When disconnected, remove speaker. Use a plastic spudger to gently coax the cable connecter sideways from the motherboard and the left speaker. When disconnected, remove speaker.
    • Use a plastic spudger to gently coax the cable connecter sideways from the motherboard and the left speaker. When disconnected, remove speaker.

  7. Use a plastic spudger to gently disconnect the cable connecter from the daughterboard and the right speaker. Remove the speaker. Use a plastic spudger to gently disconnect the cable connecter from the daughterboard and the right speaker. Remove the speaker. Use a plastic spudger to gently disconnect the cable connecter from the daughterboard and the right speaker. Remove the speaker.
    • Use a plastic spudger to gently disconnect the cable connecter from the daughterboard and the right speaker. Remove the speaker.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Sarah Westberg

Mitglied seit: 11.03.2019

2.472 Reputation

21 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Community

108 Mitglieder

9.949 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 3

Letzten 30 Tage: 9

Insgesamt: 97