Einleitung

Use this guide to replace your Samsung galaxy Note's speaker.

Grasp the cap of the stylus and remove it from its slot in the midframe. Grasp the cap of the stylus and remove it from its slot in the midframe.
  • Grasp the cap of the stylus and remove it from its slot in the midframe.

Kommentar hinzufügen

Pry with a plastic opening tool, or your fingernail, in the divot to the right of the rear-facing camera, near the volume rocker. Pry with a plastic opening tool, or your fingernail, in the divot to the right of the rear-facing camera, near the volume rocker.
  • Pry with a plastic opening tool, or your fingernail, in the divot to the right of the rear-facing camera, near the volume rocker.

Kommentar hinzufügen

Lift and remove the rear case from the phone. Lift and remove the rear case from the phone.
  • Lift and remove the rear case from the phone.

Kommentar hinzufügen

Insert your finger in the notch of the battery compartment. Press the battery toward the rear facing camera while pulling outward.
  • Insert your finger in the notch of the battery compartment.

  • Press the battery toward the rear facing camera while pulling outward.

Kommentar hinzufügen

Use the flat end of a spudger, or your fingernail, to press the microSD card slightly deeper into its slot until you hear a click. After the click, release the card and it will pop out of its slot. For reassembly, push the microSD card into the slot until it clicks in place.
  • Use the flat end of a spudger, or your fingernail, to press the microSD card slightly deeper into its slot until you hear a click.

  • After the click, release the card and it will pop out of its slot.

  • For reassembly, push the microSD card into the slot until it clicks in place.

Kommentar hinzufügen

Remove the microSD card from its slot in the midframe.
  • Remove the microSD card from its slot in the midframe.

Kommentar hinzufügen

Use a plastic opening tool, or your fingernail, to push the SIM card out of its compartment. Use a plastic opening tool, or your fingernail, to push the SIM card out of its compartment.
  • Use a plastic opening tool, or your fingernail, to push the SIM card out of its compartment.

Kommentar hinzufügen

Slide the SIM card out the rest of the way with your thumb and remove it from the device. Slide the SIM card out the rest of the way with your thumb and remove it from the device.
  • Slide the SIM card out the rest of the way with your thumb and remove it from the device.

Kommentar hinzufügen

Remove the nine 3.4 mm Phillips #00 screws securing the midframe to the display assembly.
  • Remove the nine 3.4 mm Phillips #00 screws securing the midframe to the display assembly.

Kommentar hinzufügen

Insert your plastic opening tool to the left of the power button between the midframe and the front panel assembly and pry. Insert your plastic opening tool to the left of the power button between the midframe and the front panel assembly and pry.
  • Insert your plastic opening tool to the left of the power button between the midframe and the front panel assembly and pry.

Kommentar hinzufügen

Slide the plastic opening tool down the seam. Slide the plastic opening tool down the seam. Slide the plastic opening tool down the seam.
  • Slide the plastic opening tool down the seam.

Kommentar hinzufügen

Insert your plastic opening tool to the left of the headphone jack between the midframe and the display assembly. Slide the opening tool along the top edge of the phone. Continue to run the plastic opening tool around the perimeter of the phone until the midframe is separated.
  • Insert your plastic opening tool to the left of the headphone jack between the midframe and the display assembly.

  • Slide the opening tool along the top edge of the phone.

  • Continue to run the plastic opening tool around the perimeter of the phone until the midframe is separated.

Kommentar hinzufügen

Remove the midframe from the display assembly. Remove the midframe from the display assembly.
  • Remove the midframe from the display assembly.

Kommentar hinzufügen

Remove the three 3 mm Phillips #00 screws securing the speaker enclosure to the front panel assembly.
  • Remove the three 3 mm Phillips #00 screws securing the speaker enclosure to the front panel assembly.

Kommentar hinzufügen

Remove the speaker enclosure from the display assembly. Remove the speaker enclosure from the display assembly.
  • Remove the speaker enclosure from the display assembly.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer haben diese Anleitung absolviert.

Sam Lionheart

Mitglied seit 18.10.2012

314.972 Reputation

1.641 Anleitungen geschrieben

Team

iFixit Mitglied von iFixit

Community

115 Mitglieder

5.778 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 2

Letzte 7 Tage: 11

Letzte 30 Tage: 53

Insgesamt: 6,234