Einleitung
This guide will require the use of a Phillips head screwdriver. The ribbon connector is usually the reason the device will need this replacement.
Was du brauchst
-
-
Use an opening tool to push in and release sixteen small plastic clips around the edge of the case. As the clips are released, gradually pry the case apart.
-
-
-
-
Use the opening tool or a fingernail to release the ZIF connector.
-
Disconnect the camera ribbon cable.
-
Remove the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team 14-101, Meier Fall 2015 Mitglied von USF Tampa, Team 14-101, Meier Fall 2015
USFT-MEIER-F15S14G101
4 Mitglieder
12 Anleitungen geschrieben
