Repariere deine Sachen Community Store

Teenage Engineering OP-Z Back Cover Replacement

Einleitung

Use this guide to open the OP-Z and replace the back cover.

  1. Teenage Engineering OP-Z Back Cover Replacement, Back Cover: Schritt 1, Bild 1 von 3 Teenage Engineering OP-Z Back Cover Replacement, Back Cover: Schritt 1, Bild 2 von 3 Teenage Engineering OP-Z Back Cover Replacement, Back Cover: Schritt 1, Bild 3 von 3

    • Unlock the four rubber feet by turning them 90° counterclockwise using your thumb or finger tip.

    • There is a tiny mark on every foot facing the bottom edge of the OP-Z. After turning them they should face towards the short edge where the on/off switch is.

    Bearbeiten

  3. Teenage Engineering OP-Z Back Cover Replacement: Schritt 2, Bild 1 von 2 Teenage Engineering OP-Z Back Cover Replacement: Schritt 2, Bild 2 von 2

    • When turning the OP-Z over again the bottom plate should come off by itself (thanks gravity).

    • If the bottom plate won’t come off you might want to make sure every foot is rotated correctly and gently tug on one of them.

    Bearbeiten

  4. Teenage Engineering OP-Z Back Cover Replacement: Schritt 3, Bild 1 von 1

    • Remove the bottom plate including the rubber feet.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

Autor:in

mit 1 anderen Mitwirkenden

Tobias Isakeit

Mitglied seit: 03/31/14

117.802 Reputation

188 Anleitungen geschrieben

Auszeichnungen: 46

+ 43 weitere Auszeichnungen

Team

Tobias Isakeit - Repairability Engineer Mitglied von Tobias Isakeit - Repairability Engineer

Business

1 Mitglied

1.083 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 14

Letzte 30 Tage: 35

Insgesamt: 1,527