Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement - iFixit Reparaturanleitung

Einleitung

Use this guide to replace the bypass valve assembly in your Titan Impact 410 Airless Sprayer.

Was du brauchst

Schritt 1 Safety precautions

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Safety precautions: Schritt 1, Bild 1 von 2

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Safety precautions: Schritt 1, Bild 2 von 2

Before you begin, make sure to follow the pressure relief procedure documented in the user manual before powering down the paint sprayer and disconnecting the pump.
Turn off and unplug the sprayer.

Schritt 2 Remove the valve handle

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the valve handle: Schritt 2, Bild 1 von 3

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the valve handle: Schritt 2, Bild 2 von 3

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the valve handle: Schritt 2, Bild 3 von 3

Use a flat punch tool and a hammer to tap the groove pin from left to right out of the valve handle.

Schritt 3

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement: Schritt 3, Bild 1 von 2

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement: Schritt 3, Bild 2 von 2

Remove the valve handle from the cam base.
During reassembly, apply grease to the cam base before reattaching the valve handle.

Schritt 4 Remove the cam base

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the cam base: Schritt 4, Bild 1 von 3

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the cam base: Schritt 4, Bild 2 von 3

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the cam base: Schritt 4, Bild 3 von 3

Remove the cam base.

Schritt 5 Loosen the bypass valve assembly

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Loosen the bypass valve assembly: Schritt 5, Bild 1 von 2

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Loosen the bypass valve assembly: Schritt 5, Bild 2 von 2

Use a 13/16" wrench, or an adjustable wrench, to loosen the bypass valve assembly.
Rotate the wrench counterclockwise.

Schritt 6 Remove the bypass valve assembly

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the bypass valve assembly: Schritt 6, Bild 1 von 2

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the bypass valve assembly: Schritt 6, Bild 2 von 2

Remove the bypass valve assembly.
During reassembly, be sure to replace the copper crush washer included in the bypass valve assembly kit.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Autor:in

mit 1 anderen Mitwirkenden

Alex Diaz-Kokaisl

Mitglied seit: 01/16/22

124.510 Reputation

581 Anleitungen geschrieben

Auszeichnungen: 34

+ 31 weitere Auszeichnungen

Team

iFixit Mitglied von iFixit

Staff

136 Mitglieder

17.288 Anleitungen geschrieben

0 Kommentare

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 26

Insgesamt: 478