Repariere deine Sachen Community Store

Turtle Beach Ear Force XO Four Speaker Cone Replacement

Einleitung

If one of your Turtle Beach Ear Force XO Four speakers stops working, it may need to be replaced. To do so, follow this guide.

Was du brauchst

  1. Turtle Beach Ear Force XO Four Speaker Cone Replacement, Ear Cushion: Schritt 1, Bild 1 von 1
    In diesem Schritt verwendetes Werkzeug:
    Jimmy
    $7.95
    Kaufen

    • Insert a flat metal object (such as iFixit's Jimmy tool) between the green and black plastic portions of the headset.

    • When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.

    Bearbeiten

  2. Turtle Beach Ear Force XO Four Speaker Cone Replacement: Schritt 2, Bild 1 von 2 Turtle Beach Ear Force XO Four Speaker Cone Replacement: Schritt 2, Bild 2 von 2

    • Carefully pry the plastic pieces apart, working your way around the ear cushion.

    • Be sure not to break the tabs on the back side of the ear pad!

    Bearbeiten

  4. Turtle Beach Ear Force XO Four Speaker Cone Replacement: Schritt 3, Bild 1 von 3 Turtle Beach Ear Force XO Four Speaker Cone Replacement: Schritt 3, Bild 2 von 3 Turtle Beach Ear Force XO Four Speaker Cone Replacement: Schritt 3, Bild 3 von 3

    • Pull the loosened ear pad apart from the rest of the speaker.

    • Pushing the pad and the speaker back together is the only step required for ear pad reassembly.

    Bearbeiten

  5. Turtle Beach Ear Force XO Four Speaker Cone Replacement, Speaker Cone: Schritt 4, Bild 1 von 2 Turtle Beach Ear Force XO Four Speaker Cone Replacement, Speaker Cone: Schritt 4, Bild 2 von 2

    • Remove four 7.3mm PH0 screws.

    • As these screws are very small, it may be best to keep them in a plastic bag or other container.

    Bearbeiten

  6. Turtle Beach Ear Force XO Four Speaker Cone Replacement: Schritt 5, Bild 1 von 2 Turtle Beach Ear Force XO Four Speaker Cone Replacement: Schritt 5, Bild 2 von 2

    • Lift speaker cone off of the back casing.

    • Be gentle; the small wires connecting the speaker cone to the rest of the device may break if you pull too hard.

    • Follow iFixit's soldering guide to remove the wires connected to the speaker.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

9 weitere Nutzer:innen haben diese Anleitung absolviert.

Autor:in

mit 3 anderen Mitwirkenden

Evalyn Johnson

Mitglied seit: 09/22/15

228 Reputation

2 Anleitungen geschrieben

Auszeichnungen: 12

+ 9 weitere Auszeichnungen

Team

Baylor, Team 10-14, Williams Fall 2015 Mitglied von Baylor, Team 10-14, Williams Fall 2015

BU-WILLIAMS-F15S10G14

3 Mitglieder

8 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 9,380