Einleitung
This replacement guide will require a soldering tool and various other iFixit tools.
Was du brauchst
-
-
Use a J1 Phillips screwdriver to remove the four 6.1 mm screws at the back of the monitor.
-
-
-
-
Use a J1 Phillips screwdriver to remove the three 6.1 mm screws on the motherboard.
-
-
-
Carefully, lift the motherboard and turn it to the backside.
-
Desolder the four corners of the power button. Please follow this link on how to proceed to desolder: Wie man Lötverbindungen herstellt und entlötet
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team 1-1, Nance Fall 2016 Mitglied von USF Tampa, Team 1-1, Nance Fall 2016
USFT-NANCE-F16S1G1
3 Mitglieder
8 Anleitungen geschrieben
