Repariere deine Sachen Community Store

Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.

Vizio VTAB1008 Front Facing Camera Replacement

Was du brauchst

  1. Vizio VTAB1008 Front Facing Camera Replacement, Vizio VTAB1008 Back Cover Removal: Schritt 1, Bild 1 von 2 Vizio VTAB1008 Front Facing Camera Replacement, Vizio VTAB1008 Back Cover Removal: Schritt 1, Bild 2 von 2

    • Carefully slide the heavy duty opening tool between the gap on the side of the device with no buttons.

    • Do not insert the opening tool too far into the tablet as this can damage connectors close to edges of the cover.

    • The angled tip of the opening tool can be wedged into the device by pressing on the back of the opening tool with the thumb. Move the opening tool in a sliding motion to ensure all tabs separate.

    • Corner tabs may require a more forceful prying tool. If needed, carefully insert the metal prying tool into corners to separate the tabs.

    Übersetzen

  2. Vizio VTAB1008 Front Facing Camera Replacement: Schritt 2, Bild 1 von 1

    • Look into the tablet for loose connectors.

    • There are three loose connectors: one for the screen, one for the digitizer, and one for the motherboard. They are held in place by the pressure of the backing and screen assemblies.

    • Flip the backing from the button-less side over, being careful not to separate the ribbon connector from the display screen.

    Übersetzen

  4. Vizio VTAB1008 Front Facing Camera Replacement, Front Facing Camera and Light Sensor Board: Schritt 3, Bild 1 von 2 Vizio VTAB1008 Front Facing Camera Replacement, Front Facing Camera and Light Sensor Board: Schritt 3, Bild 2 von 2

    • Remove screw with the J1 screwdriver or screw bit.

    • Screw has a 3.66 mm head and is 3.5 mm tall.

    Übersetzen

  5. Vizio VTAB1008 Front Facing Camera Replacement: Schritt 4, Bild 1 von 3 Vizio VTAB1008 Front Facing Camera Replacement: Schritt 4, Bild 2 von 3 Vizio VTAB1008 Front Facing Camera Replacement: Schritt 4, Bild 3 von 3

    • Lift the flap hiding second screw.

    • Remove the screw by using J1 screwdriver.

    • Screw has a 3.66 mm head and is 3.5 mm tall.

    Übersetzen

  6. Vizio VTAB1008 Front Facing Camera Replacement: Schritt 5, Bild 1 von 3 Vizio VTAB1008 Front Facing Camera Replacement: Schritt 5, Bild 2 von 3 Vizio VTAB1008 Front Facing Camera Replacement: Schritt 5, Bild 3 von 3

    • Disconnect the black and red cable connector from the camera strip.

    • Using tweezers may help to grab the small connector flanges.

    Übersetzen

  7. Vizio VTAB1008 Front Facing Camera Replacement: Schritt 6, Bild 1 von 3 Vizio VTAB1008 Front Facing Camera Replacement: Schritt 6, Bild 2 von 3 Vizio VTAB1008 Front Facing Camera Replacement: Schritt 6, Bild 3 von 3

    • Disconnect the ribbon cable from the camera circuit board by lifting it away from circuit board.

    • A spudger may help with leverage when removing the ribbon cable.

    Übersetzen
Abschluss

To reassemble your device, follow these instructions in reverse order.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 128